Name: srdf
Author: earthtojake

MoveIt2 SRDF authoring, validation, and planning-semantics workflow. Use when creating, editing, inspecting, or validating `.srdf` files, MoveIt planning groups, virtual joints, passive joints, end effectors, group states, disabled collisions, URDF-paired planning semantics, or SRDF handoff for live

SRDF Provenance: maintained in [earthtojake/text to cad](https://github.com/earthtojake/text to cad). Use the installed local skill files as the runtime source of truth; the repository link is only for provenance and release review. Use this skill for MoveIt semantic robot descriptions on top of an existing valid URDF. SRDF defines planning semantics; it does not define physical robot structure. The .srdf file is the source of truth: author and edit the XML directly. SRDF correctness is a planning semantics problem. The common failure is not invalid XML; it is a plausible SRDF that gives MoveIt the wrong planning group, wrong tool link, wrong default state, unsafe disabled collision matrix, or wrong joint units. Because language models are weak at spatial and kinematic reasoning, derive planning groups, end effectors, group states, and disabled collisions from the URDF topology, MoveIt Setup Assistant output, sampled collision analysis, or explicit user data. Do not infer them from visual theme alone — and do not type any link or joint name from memory: extract the URDF's link/joint table first and copy names from it. Setup Run cadgen through the cadgen command its installation writes, so this skill's commands share one installation, and its engine server, with the CAD app's: cadgen below means cadgen +0.8.2 ( ~/.local/bin/cadgen +0.8.2 where ~/.local/bin is not on your PATH) python below means cadgen +0.8.2 run If cadgen is not on your PATH, or it says 0.8.2 is not installed, run uvx no config managed python python 3.13 from cadgen==0.8.2 cadgen doctor once, outside any sandbox or with its permission: it installs cadgen, registers it, writes the cadgen command and starts the engine. With the CAD app's server running, nothing else needs the sandbox's permission: it starts the engine and holds it. Without it, a sandboxed shell cannot start the engine; when a command says no engine is running, run cadgen server outside the sandbox once. Format boundary URDF owns physical robot structure: links, joints, geometry, inertials, limits, mimic joints, transmissions, and robot state publishing. SRDF owns MoveIt semantics: virtual joints, passive joints, planning groups, group states, end effectors, and disabled collision pairs. SDF owns simulator/world semantics: physics, sensors, lights, plugins, worlds, and simulation specific metadata. Do not place geometry, inertials, joint origins, link poses, mesh references, physical joint limits, transmissions, or ros2 control interfaces in SRDF. Show the model Show the user each model you create or change, and any model or file they ask to see. A file you export is a download: give its path, do not open it. Snapshots and validation don't replace this. Never screenshot the viewer to confirm your own work; review with cadgen snapshot . If your tools include cad show (your host may prefix it), call it with the model's id or the file's absolute path, and follow its description for when to call it again. The other tools depend on the host. A host that draws CAD cards or tabs (Claude Desktop, the Codex app) also has cad view , which reads what the user selected, and cad screenshot , which shows you what they see, both of a card or tab that is open, for when they ask about it. A text host (Claude Code in a terminal, codex exec ) draws nothing: its cad show opens the model's page in the user's browser and answers with the URL to give them, and it has no view to read. cad inspect , cad snapshot and cad export are on every host. Call only the tools you have, and never say a card shows a model when your host drew none. Otherwise give the user the page's link once: a model's page is the view: line its run prints. For a file, run the CAD Viewer, from any folder: The command ensures this installation's engine, registers each file and prints its page, /<id , then exits. Read each file's url from documents in its one JSON line (never guess the port); the URL carries its token query. A page follows every later run of its model and every rewrite of its file, so share it once. Return that link to the user. If it fails to launch, say so. An .srdf you write is the robot's model, not an export: show it. Keep the SRDF beside its uniquely matching URDF (same robot name). Review planning groups, named states and joints; visual review does not prove planning correctness. Required workflow 1. Start from a valid URDF. Author or fix the URDF first with $urdf and validate it. The SRDF pairs with that URDF by colocation and robot name, and every name in the SRDF must exist in it. 2. Extract the URDF table. Before writing any SRDF XML, list the URDF's robot name, links, joints (with type, parent, child, limits, mimic flags). Copy names from this table only; never type them from memory. See references/srdf workflow.md . 3. Identify the planning task. Record whether the goal is arm IK, gripper control, mobile base planning, dual arm planning, tool use, or local smoke testing. 4. Create or update the planning ledger. Use references/planning ledger.md before writing XML; keep a compact copy as a comment block in the .srdf . 5. Pair with the URDF by colocation. Save the .srdf in the same folder as its .urdf , with the same <robot name — that is the only linking mechanism. The validator and the viewer both resolve the pairing by scanning the folder for the URDF whose robot name matches; exactly one URDF per robot name per folder. No metadata element links the files. See references/authoring contract.md . 6. Define virtual and passive joints deliberately. Use them when needed by the robot model. 7. Define planning groups from URDF topology. Prefer chain groups for serial manipulators when base/tip form a real parent to child path in the URDF tree (the validator verifies this). Use joint/link/subgroup definitions only when they are deliberate. 8. Define end effectors after group membership is known. Avoid overlap between an end effector group and its parent group. Record the actual target/TCP link. 9. Define group states in URDF native units. Revolute and continuous values are radians; prismatic values are meters. Do not store degrees in SRDF. Values must lie within URDF limits and must not set fixed or mimic joints. 10. Generate disabled collisions from evidence. Use adjacency derived from the URDF joint table, MoveIt Setup Assistant sampling, or explicit user provided collision matrices. Do not invent broad disable lists. See references/disabled collisions.md . 11. Validate every created or modified .srdf with cadgen srdf validate ; it cross validates all names, chains, states, and pairs against the paired URDF. Fix findings and re validate until clean. 12. Run MoveIt smoke tests when available. Use MoveIt Setup Assistant or a project MoveIt launch directly. 13. Report assumptions and skipped checks. Include incomplete validation, missing MoveIt environment, manually reasoned collision disables, and inferred target links. Commands Run cadgen as Setup defines it. cadgen doctor <skill dir reports the installation in use and checks that it is the one this skill pins — docs drift silently on another. Validation itself needs nothing beyond the Python standard library; a snapshot draws with the CAD kernel. Use cadgen <verb help for the complete current interface. The validator shape is: The validator parses the SRDF, resolves the paired URDF (the same folder .urdf whose robot name matches; none, several, or an invalid one is an error), and cross validates: group/joint/link/subgroup name existence, chain path resolvability, subgroup cycles, virtual/passive joints, end effector topology, group state membership/limits/completeness, disabled collision pairs (including Adjacent reason truthfulness), and misspelled elements. Each phase collects all its findings in one pass (severity, code, XML path), but a structural error stops the cross file phase — re run after every fix. One run validates ONE file: strict treats warnings as failures and json prints one line of {"ok", "path", "issues": [{"severity", "code", "message", "element", "hint"}], "summary"} , where element is the XML path. It exits nonzero if the target fails. Relative targets resolve from the current working directory. Hard rules The SRDF lives in the same folder as its URDF and shares its <robot name ; that colocation plus name match is the only pairing mechanism, and exactly one URDF per robot name may exist in the folder. Every link, joint, group, and subgroup name must come from the URDF table or a group defined in the same file. Group states use URDF native units: radians for revolute/continuous, meters for prismatic. Disabled collision pairs require truthful reasons and provenance. End effector groups should not share links with their parent planning group. Visual rendering review is useful but cannot prove planning correctness. Snapshot Tool cadgen snapshot draws the robot to a PNG still, as the CAD Viewer shows it, rendered by OCCT: Hand it the .srdf : it draws the paired URDF's geometry, the same folder .urdf whose <robot name matches, exactly as cadgen srdf validate pairs them. No match, or more than one, is refused before anything renders, naming the robot name it looked for and the .urdf files it found. The robot opens where the CAD Viewer opens it: every joint at zero, then this SRDF's home group state if it declares one. pose names a group state ( group/name , or a name only one group has) or gives joint values over that opening pose, in degrees (metres for a prismatic joint), each naming a joint a person can drive, within its limits, or the request is refused before anything renders: a fixed joint or a <mimic follower is refused by name (a follower follows its leader). Each link is placed by the viewer's own forward kinematics and drawn in one colour of the Parts palette. A visual is a box , cylinder or sphere , which cadgen meshes itself, or an STL, 3MF or GLB file beside the URDF; a mesh in another format ( .dae , .obj ), a package:// or remote URI, or a missing file is refused by name, and a link mesh that cannot be loaded fails the snapshot rather than leaving the link out. A normal snapshot uses Solid mode and Light appearance. display takes any of the viewer's display modes ( parts , xray , hidden line , wireframe , ...), exploded=AMOUNT , or the display object: appearance ( light or dark ), camera (projection and focal length) and clip ( {"clip": {"axis": "x", "at": 0.05}} , at in metres, the file's own unit, as the viewer draws it). grid draws the measuring grid, preview draws Preview's photographic look, and camera , size profile , width and height frame and size it. A Quick Edit packet from the viewer (inline JSON, saved to a temporary .snapshot.json , or its path) replays with annotation <packet camera authored , its job's jointValues given as pose . Inspect supplied annotations before editing. Without annotations, the captured view is optional context; render it when useful to the request. Link meshes are resolved relative to the description, so they must be present: an unhydrated Git LFS pointer is not a mesh and fails the snapshot. Run git lfs checkout <mesh dir first. OUT is written exactly as given and must be a .png ; check the exit status before reading it. Use cadgen snapshot help for the complete current interface. References Authoring contract (structure, URDF pairing, golden skeleton): references/authoring contract.md SRDF workflow (URDF table extraction, edit loop): references/srdf workflow.md Planning ledger: references/planning ledger.md Validation and verification recipe: references/validation.md End effectors: references/end effectors.md Disabled collisions: referenc